Does the coronoid fracture in terrible triad injury always need to be fixed?

BACKGROUND: The ideal treatment of terrble triad injuries and whether fixation of coronoid process fractures is needed or not are still debated. Therefore, we aimed to investigate if terrible triad injuries necessitate coronoid fracture fixation and evaluate if non-fixation treatments have similar efficacies and outcomes as fixation-treatments in cases of terrible triad injuries. METHODS: From August 2011 to July 2020, 23 patients with acute terrible triad injuries without involvement of the anteromedial facet of the coronoid process were included to evaluate the postoperative clinical and radiological outcomes (minimum follow-up of 20 months). According to the preoperative height loss evaluation of the coronoid process and an intraoperative elbow stability test, seven patients underwent coronoid fracture fixation, and the other eight patients were treated conservatively. The elbow range of motion (ROM), Mayo Elbow Performance Score (MEPS), and modified Broberg-Morrey score were evaluated at the last follow-up. In addition, plain radiographs were reviewed to evaluate joint congruency, fracture union, heterotopic ossification, and the development of arthritic changes. RESULTS: At the last follow-up, the mean arcs of flexion-extension and supination-pronation values were 118.2° and 146.8° in the fixation group and 122.5° and 151.3° in the non-fixation group, respectively. The mean MEPSs were 96.4 in the fixation group (excellent, nine cases; good, tow cases) and 96.7 in the non-fixation group (excellent, ten cases; good, two cases). The mean modified Broberg-Morrey scores were 94.0 in the fixation group (excellent, sevev cases; good, four cases) and 94.0 in the non-fixation group (excellent, ten cases; good, tow cases). No statistically significant differences in clinical scores and ROM were identified between the two groups. However, the non-fixation group showed a significantly lower height loss of the coronoid process than the fixation group (36.3% versus 54.5%). CONCLUSIONS: There were no significant differences in clinical outcomes between the fixation and non-fixation groups in terrible triad injuries.

Combined radial wedge and shortening osteotomy versus scaphocapitate arthrodesis in advanced Kienböck's disease.

Although various surgical techniques have been reported for the treatment of advanced Kienböck's disease (Lichtman stage IIIB and above), the ap- propriate operative treatment is still being debated. This study compared the clinical and radiological outcomes of combined radial wedge and shortening osteotomy (CRWSO) and scaphocapitate arthrodesis (SCA) in the treatment of advanced Kienböck's disease (above type IIIB) with a minimum of 3 years of follow-up. We analyzed the data from 16 and 13 patients who underwent CRWSO and SCA, respectively. The average follow-up period was 48.6±12.8 months. Clinical outcomes were evaluated using the flexion-extension arc, grip strength, Disabilities of the Arm, Shoulder, and Hand Questionnaire (DASH), and Visual Analogue Scale (VAS) for pain. The following radiological parameters were measured: ulnar variance (UV), carpal height ratio (CHR), radioscaphoid angle (RSA), and Stahl index (SI). Osteoarthritic changes in the radiocarpal and midcarpal joints were evaluated using computed tomography (CT). Clinically, both groups showed significant improvements in the grip strength, DASH, and VAS at final follow-up. However, regarding the flexion-extension arc, the CRWSO group showed a significant improvement, while the SCA group did not. Radiologically, compared to the preoperative values, the CHR results improved at final follow-up in the CRWSO and SCA groups. There was no statistically significant difference in the degree of CHR correction between the 2 groups. By the final follow-up visit, none of the patients in either group had progressed from Lichtman stage IIIB to stage IV. Considering restoration of wrist joint range of motion, CRWSO may be a good alternative for limited carpal arthrodesis for advanced Kienböck's disease.

A novel technique of pulley creation for additional sagittal band reconstruction.

Because surgical treatment of chronic extensor tendon dislocation with sagittal band injury is complex and often requires donor grafts, we suggest a new technique: pulley creation for additional sagittal band reconstruction. A 76-year-old man diagnosed with chronic extensor tendon dislocation with radial sagittal band injury was treated by resecting the distended portion of the radial sagittal band, followed by plication. Using the remnant tissue obtained after resection, additional sagittal band reconstruction was performed using two mini soft suture anchors in the form of a pulley surrounding the extensor tendon. Three-year outcome was satisfactory. Pulley creation for additional sagittal band reconstruction with direct repair of the radial sagittal band is a new surgical option for chronic extensor tendon dislocation. The technique is quick and easy, with good patient satisfaction and no donor site complications.

Sequential Bilateral Hip Fractures in Elderly Patients.

PURPOSE: To evaluate the incidence and presentation of osteoporotic sequential bilateral hip fractures (SBHF) in Center for Joint Disease, Chonnam National University Hwasun Hospital as there are limited studies with variable results reported in Korea. MATERIALS AND METHODS: Records of 507 patients aged >60 years old presenting with osteoporotic hip fractures between 2009 and 2015 were retrospectively reviewed to document the occurrence and presentation of sequential hip fractures; mean post-treatment follow-up was 48 months. Additionally, any correlations between sequential fractures and initial fracture and risk factors were assessed. Bone mineral density (BMD) was measured before and after sequential hip fracture for comparison. RESULTS: There were 246 femoral neck (Group A) and 261 intertrochanteric (Group B) fractures. The cumulative incidence of SBHF was 8.2% (42 patients total; 29 in Group A and 13 in Group B). Average interval of SBHF for Group A and Group B were 37.4 months and 29.9 months, respectively. There was significant correlation between the initial fracture type and sequential fractures, particularly the trochanteric and subgroup of those with neck fractures. Hypertension as a co-morbidity and female sex have been identified as risk factors for SBHF. No significant findings were noted regarding BMD and risk factors in both groups. CONCLUSION: The clinical presentations of SBHF noted here concur with other worldwide studies and may guide efforts to develop relevant programs to prevent SBHF.

Three-dimensional-printing Technology in Hip and Pelvic Surgery: Current Landscape.

The use of three-dimensional (3D) printing is becoming more common, including in the field of orthopaedic surgery. There are currently four primary clinical applications for 3D-printing in hip and pelvic surgeries: (i) 3D-printed anatomical models for planning and surgery simulation, (ii) patient-specific instruments (PSI), (iii) generation of prostheses with 3D-additive manufacturing, and (iv) custom 3D-printed prostheses. Simulation surgery using a 3D-printed bone model allows surgeons to develop better surgical approaches, test the feasibility of procedures and determine optimal location and size for a prosthesis. PSI will help inform accurate bone cuts and prosthesis placement during surgery. Using 3D-additive manufacturing, especially with a trabecular pattern, is possible to produce a prosthesis mechanically stable and biocompatible prosthesis capable of promoting osseointergration. Custom implants are useful in patients with massive acetabular bone loss or periacetabular malignant bone tumors as they may improve the fit between implants and patient-specific anatomy. 3D-printing technology can improve surgical efficiency, shorten operation times and reduce exposure to radiation. This technology also offers new potential for treating complex hip joint diseases. Orthopaedic surgeons should develop guidelines to outline the most effective uses of 3D-printing technology to maximize patient benefits.

Coronal malalignment of lower legs depending on the locations of the exostoses in patients with multiple hereditary exostoses.

BACKGROUNDS: Though malalignment of lower legs is a common pathologic phenomenon in multiple hereditary exostoses (MHE), relationship between locations of exostoses and malalignment of lower legs remains unclear. This study examined radiographs of MHE patients in an attempt to evaluate the tendency of coronal malalignment of lower legs with different location of exostoses on lower legs consisting of two parallel long bones. METHODS: Between 2000 and 2017, we retrospectively reviewed the anteroposterior films of the teleo-roentgenographics of 63 patients with MHE. The patients were classified into four different groups depending on the locations of the exostosis, which occurred on both proximal and distal tibiofibular joints (A), proximal tibiofibular joint (B), distal tibiofibular joint (C), and not for the tibiofibular joint area (D). To evaluate the influence of the location of exostoses on coronal malalignment of lower legs, medial proximal tibia angle (MPTA), lateral distal tibia angle (LDTA), and fibular shortening were analyzed for each group. RESULTS: Significant difference was observed in multiple comparative analyses for each of the four groups. On MPTA radiologic analysis, group A showed greatest value with significant difference compared with groups C and D (vs. (B): p = 0.215; vs. distal joints (C): p = 0.004; vs. (D): p = 0.001). Group B showed significant difference only with group D (vs. distal joints (C): p = 0.388; vs. (D): p = 0.002), but for group C and D showed no significant difference. For LDTA, only group A showed significant difference compared to other groups (p < 0.001). With regard to tibiofibular ratio for evaluation of fibular shortening, group A showed the lowest ratio (vs. (B): p = 0.004; vs. (C): p = 0.655; vs. (D): p < 0.001). Group C also presented the significant lower ratio than group D (p = 0.002). CONCLUSIONS: For evaluation of the coronal malalignment of lower legs in MHE patients, not only ankle around the distal tibiofibular joint but also proximal tibiofibular joint should be examined, in that, lower limb deformity occurred by two parallel long bone which has self-contained joint. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

Comparison of Radiological Parameters between Normal and Patellar Dislocation Groups in Korean Population: A Rotational Profile CT-Based Study.

PURPOSE: Patellofemoral instability is a common cause of anterior knee pain in adolescents and young adults. Most normal and pathological values for diagnosing patellofemoral instability are based on Western literature. We conducted this radiological study to determine normal values for different patellofemoral parameters in a Korean population and to evaluate their usefulness in diagnosis. MATERIALS AND METHODS: We retrospectively reviewed the rotational profile computerized tomography (CT) scans of the patellar dislocation and control groups. Trochlear, patellar, rotational profile, and trochleo-patellar alignment parameters were compared between the groups. Receiver operating characteristic curves were drawn for significant parameters, and sensitivity and specificity were calculated for the cut-off values. RESULTS: There were 48 patients in the patellar dislocation group and 87 patients in the control group. In the control group and patellar dislocation group, the mean sulcus angle was 132.5° and 143.3°, respectively, trochlear depth was 6.04 mm and 3.6 mm, bisect offset was 56.4% and 99.9%, lateral patellar tilting was 9.8° and 19.2°, patellar facet asymmetry was 63.5% and 45.16%, and the tibial tuberosity-trochlear groove (TT-TG) distance was 10.91 mm and 27.16 mm, respectively. CONCLUSIONS: The trochlear depth, bisect offset, patella tilting, and TT-TG distance were parameters that significantly contributed to patellar instability. Rotational profile CT can be considered a good diagnostic tool to assess all these parameters that help to identify anatomical aberration resulting in patellofemoral instability, thereby helping in formulating the most effective treatment plan.

Surgical Treatment of Neglected Traumatic Quadriceps Tendon Rupture with Knee Ankylosis.

Quadriceps tendon rupture is an uncommon injury. This disabling condition is the result of direct or indirect trauma. It requires surgical repair to avoid poor outcomes in cases of neglected or chronic rupture. In most acute cases, simple tendon suture or reinsertion is suitable for an extensor mechanism reconstruction of the knee joint. However, chronic lesions often require a tendon graft or flap reconstruction. We report a case of a 15-year-old male who was diagnosed with a chronic quadriceps rupture with a patellar superior pole fracture. We performed quadriceps reconstruction using tibialis anterior allograft tendon and additional screw fixation to reconstruct the extensor mechanism and recover knee joint range of motion to prevent a high-level functional restriction. The treatment was difficult and limited due to neglect for 9-months that led to ankylosis accompanied with nonunion of tibial fracture. Our surgical treatment using allograft tendon resulted in a very good outcome after 30 months of follow-up.

Change in incidence of hip fracture in Gwangju City and Jeonnam Province, Korea, over 20 years.

UNLABELLED: This study determined the incidence of hip fractures in Gwangju city and Jeonnam province of Korea in 2011 and compared it with the rates in the same area in 1991 and 2001. INTRODUCTION: This study determined the incidence of hip fracture in Gwangju city and Jeonnam province in Korea in 2011 and compared it with the rates in the same area in 1991 and 2001, with the aim of identifying any changes in 2011. METHODS: Korea Health Insurance Review Agency patient data from Gwangju city and Jeonnam province for the period 2011 January 1 to December 31 was analyzed. All claims and records of patients ≥ 50 years of age with a diagnosis of fracture of the neck of the femur, pertrochanteric fracture, and hip fracture-related surgeries including open reduction and internal fixation, closed reduction and osteosynthesis, total hip replacement, or bipolar hemiarthroplasty were analyzed. Population figures were obtained from the Korea National Statistical Office. Age- and sex-specific annual incidences were calculated. The 2011 data was compared with published data from 1991 to 2001. RESULTS: There were 1590 hip fractures in 2011, representing a crude incidence of 14.0/10,000. The incidence was 9.7/10,000 in males and 17.5/10,000 in females. The number of hip fractures and fracture incidence was 247 and 3.3/10,000 in 1991 and 1152 and 13.3/10,000 in 2001, respectively. There was a fourfold increase of fracture incidence between 1991 and 2001. Thereafter, the number of fractures increased only by 5.2 %. However, the number of arthroplasties done increased significantly. CONCLUSIONS: The incidence of fractures increased considerably between 1991 and 2001, with less increase in the ensuing 10 years.

Progression of osteoarthritis after double- and single-bundle anterior cruciate ligament reconstruction.

BACKGROUND: No consensus has been reached on the advantages of double-bundle (DB) anterior cruciate ligament reconstruction (ACLR) over the single-bundle (SB) technique, particularly with respect to the prevention of osteoarthritis (OA) after ACLR. PURPOSE: To evaluate whether DB ACLR has any advantages in the prevention of OA or provides better stability and function after ACLR compared with the SB technique. STUDY DESIGN: Randomized controlled trial; Level of evidence, 2. METHODS: A total of 130 patients with an ACL injury in one knee were prospectively randomized into a DB group (n = 65) or an SB group (n = 65). For the radiologic evaluation, we determined the degree of OA based on the Kellgren-Lawrence grade before the operation and at the time of the final follow-up and determined the number of patients with progression of OA more than one grade from pre- to postoperation. We evaluated the stability results using the Lachman and pivot-shift tests and stress radiography. We also compared the functional outcomes based on the Lysholm knee score, Tegner activity score, and International Knee Documentation Committee (IKDC) subjective scale. RESULTS: Six patients (4 in the DB group and 2 in the SB group) suffered graft failure during the follow-up and had ACL revision surgery (P = .06). A total of 112 patients were observed for a minimum of 4 years (DB group, n = 52; SB group, n = 60). Five patients (9.6%) in the DB group and 6 patients (10%) in the SB group had more advanced OA at the final follow-up (P = .75). All patients recovered full range of motion within 6 months from surgery. Stability results of the Lachman test, pivot-shift test, and the radiographic stability test failed to reveal any significant intergroup differences (P = .37, .27, and .67, respectively). In the pivot-shift result, the DB group had 4 patients with grade 2 and the SB group had 3 patients with grade 2 (P = .27). Clinical outcomes, including Lysholm knee and Tegner activity scores, were similar in the 2 groups. Statistical significance was achieved only for the IKDC subjective scale (78.2 in DB group vs 73.1 in SB group; P = .03). CONCLUSION: The DB technique, compared with SB, was not more effective in preventing OA and did not have a more favorable failure rate. Although the DB ACLR technique produced a better IKDC subjective scale result than did the SB ACLR technique, the 2 modalities were similar in terms of clinical outcomes and stability after a minimum 4 years of follow-up.